Differences

This shows you the differences between two versions of the page.

--- services:network:internal:portauth:windows:info-win-7 [2009/12/21 11:37]
radeka
+++ services:network:internal:portauth:windows:info-win-7 [2015/02/02 15:42] (current)
radeka [Windows 7 configuration guide]
@@ Line 1: / Line 1: @@
-======  Windows 7 configuration guide======
+======  Windows 7 configuration guide ======
-{{  services:sqrman.gif  }}
-Configuration guide to the Sissa Wired Network (dot1x authentication), using the default tools and drivers of Microsoft Windows 7.\\
+You have two possibilities to configure the network for internal SISSA use:\\
-This setting should be done only when a port authentication is required:
+   * the first one is the shortest and easy, but you have to install the SISSA certicate, to use this procedure please go to the section [[#Wired network configuration using SISSA certificate]] on this page;
-{{page>:services:network:internal:portauth:place-list}}
+   * the second one is longer but you can use it, if you have any problem using the first one. For the second procedure please go the the section [[#Extended Wired network configuration guide]] on this page.
+----
+\\
+==== Wired network configuration using SISSA certificate ====
+Configuration guide to the SISSA wired network, installing the SISSA certificate on Microsoft Windows 7.
+a) Download the SISSA certificate:\\
+{{http://www.sissa.it/download/wizards/ca/.lastest|click here to DOWNLOAD SISSA certificate}}.
+\\
+\\
+b) Search for the downloaded file **sissa-cert_1.2-20120215_win** icon and execute it (double click).\\
+{{:services:wifi:w-7:sissa_cer_1.jpg|Execute the file sissa-cert_1.2-20120215_win...}}
+\\
+\\
+c) On the //Open File - Security Warning// window:\\
+to allow the installation process, click on **Run**.\\
+{{:services:wifi:w-7:sissa_cer_2.jpg|Click on Run...}}
+\\
+\\
+d) On the //User Account Control// window:\\
+click on **Yes**.\\
+{{:services:wifi:w-7:sissa_cer_3.jpg|Click on Yes...}}
+\\
+\\
+e) On the //Select Setup Language// window:\\
+click on **OK**.\\
+{{:services:wifi:w-7:sissa_cer_4.jpg|Click on OK...}}
+\\
+\\
+f) On the //Setup - SISSA Root certificate// window:\\
+click on **Next**.\\
+{{:services:wifi:w-7:sissa_cer_5.jpg|Click on Next...}}
+\\
+\\
+g) On the //Setup - SISSA Root certificate// window, //Select Destination Location// section:\\
+click on **Next**.\\
+{{:services:wifi:w-7:sissa_cer_6.jpg|Click on Next...}}
+\\
+\\
+h) On the //Setup - SISSA Root certificate// window, //Select Additional Tasks// section:\\
+click on **Next**.\\
+{{:services:wifi:w-7:sissa_cer_7.jpg|Click on Next...}}
+\\
+\\
+i) On the //Setup - SISSA Root certificate// window, //Ready to Install// section:\\
+click on **Install**.\\
+{{:services:wifi:w-7:sissa_cer_8.jpg|Click on Install...}}
+\\
+\\
+j) On the //Setup - SISSA Root certificate// window:\\
+click on **Finish**.\\
+{{:services:wifi:w-7:sissa_cer_9.jpg|Click on Finish...}}
+\\
+\\
+k) Unplug the network cable, wait few seconds then plug back the network cable, in the //Notification area// (bottom-right corner of the Desktop) a pop-up window will appear:
+Click on the pop-up window to provide additional information.\\
+{{:services:network:internal:portauth:windows:7:win7_cer_1.jpg|Click on the pop-up window...}}
+\\
+\\
+l) In the //Windows Security// window:
+   * **1)** in the field where is written: //User name//, replace the text inserting  //**your SISSA username**//
+   * **2)** and in the field where is written: //Password//, replace the text inserting your  //**your SISSA password**//
+   * **3)** then click **OK**
+{{:services:network:internal:portauth:windows:7:win7_cer_2.jpg|Insert your SISSA username and password, then click OK ...}}\\
+\\
+m) In the //Set Network Location// window:
+Select **Work Network**. \\
+{{:services:network:internal:portauth:windows:7:win7_cer_3.jpg|Select Work Network...}}\\
+\\
+n) In the //Set Network Location// window:
+Select **Close**.\\
+{{:services:network:internal:portauth:windows:7:win7_cer_4.jpg|Close the window, you are now connected.}}\\
+\\
+\\
+\\
+**END** OF "**Wired network configuration using SISSA certificate**" GUIDE
 \\
-__**PLEASE NOTE: DO NOT PLUG the NETWORK CABLE untill you reach the STEP D of this procedure**__.\\
 \\
 ----
-a) On the //Desktop//,
-   * **<color red> 1) </color>** click the **Start** button,
-   * **<color red> 2) </color>** and then type **services.msc**,
-   * **<color red> 3) </color>** click on **services**.
-{{:services:network:internal:portauth:windows:7:win7dot1x1.jpg|Start, write: services.msc then click on services...}}\\
 \\
-b) In //Services// window,
+----
-   * **<color red> 1) </color>** look for **Wired AutoConfig** service, click on it using the RIGHT mouse button,
+\\
-   * **<color red> 2) </color>** and select **Properties**
+==== Extended Wired network configuration guide ====
-{{:services:network:internal:portauth:windows:7:win7dot1x2.jpg|Wired AutoConfig service --> click on it using the RIGHT mouse button and select Properties...}}\\
+Configuration guide to the Sissa Wired Network (dot1x authentication), using the default tools and drivers of Microsoft Windows 7.\\
+\\
+**PLEASE NOTE: DO NOT PLUG the NETWORK CABLE untill you reach the STEP D of this procedure**.\\
+----
+a) On the //Desktop//:
+   * **1)** click on the **Start** button;
+   * **2)** and then insert **services.msc**
+   * **3)** click on **services**.
+{{:services:network:internal:portauth:windows:7:win7dot1x1.jpg|Start, insert: services.msc then click on services...}}\\
+\\
+b) In //Services// window:
+   * **1)** look for **Wired AutoConfig** service (or **Configurazione automatica reti cablate** in Italian), click on it using the right mouse button;
+   * **2)** and select **Properties**.
+{{:services:network:internal:portauth:windows:7:win7dot1x2.jpg|Wired AutoConfig service --> click on it using the right mouse button and select Properties...}}\\
 \\
-c) In the //Wired AutoConfig Properties// window,
+c) In the //Wired AutoConfig Properties// window:
-   * **<color red> 1) </color>** in //Startup type:// drop down list select **Automatic**
+   * **1)** in //Startup type:// drop down list select **Automatic**;
-   * **<color red> 2) </color>** in //Service status:// field click **Start**
+   * **2)** in //Service status:// section click on **Start**;
-   * **<color red> 3) </color>** then click on **OK**, \\
+   * **3)** then click on **OK**; \\
 and at the end close //Services// window.\\
 {{:services:network:internal:portauth:windows:7:win7dot1x3.jpg|Choose carefully the correct options on this window...}}\\
 \\
-d) Connect the **Ethernet cable**!\\
+d) Connect the Ethernet cable!\\
-In the **Notification area** (bottom-right corner of the Desktop):
+In the //Notification area// (bottom-right corner of the Desktop):
-   * **<color red> 1) </color>** click on the **Network** icon, {{:services:network:internal:portauth:windows:7:win7dot1x14.jpg|Network icon}},
+   * **1)** click on the **Network** icon, {{:services:network:internal:portauth:windows:7:win7dot1x14.jpg|the Network icon image is similar to a monitor}};
-   * **<color red> 2) </color>** and then on the **Open Network and Sharing Center**.
+   * **2)** and then on the **Open Network and Sharing Center**.
 {{:services:network:internal:portauth:windows:7:win7dot1x4.jpg|Connect the Ethernet cable --> Click on the Network icon and then on Open Network and Sharing Center...}}\\
 \\
-e) In the //Network and Sharing Center// window, //**Network**// section, active //Connections:// field:
+e) In the //Network and Sharing Center// window, //Network// section, active //Connections:// field: \\
-   * click on **Local Area Connection**
+click on **Local Area Connection**. \\
-{{|Click on Local Area Connection...}}\\
+{{:services:network:internal:portauth:windows:7:win7dot1x5.jpg|Click on Local Area Connection...}}\\
 \\
-f) On the //Local Area Connection Status// window,
+f) On the //Local Area Connection Status// window:\\
-   * Click on **Properties**
+click on **Properties**.\\
 {{:services:network:internal:portauth:windows:7:win7dot1x6.jpg|Click on Properties...}}\\
 \\
-g) In the //Local Area Connection Properties// window,
+g) In the //Local Area Connection Properties// window:
-   * **<color red> 1) </color>** select **Authentication** tab,
+   * **1)** select **Authentication** tab;
-   * **<color red> 2) </color>** put a check in **Enable IEEE 802.1X authentication** box,
+   * **2)** **put a check** in //Enable IEEE 802.1X authentication// box;
-   * **<color green> 3) </color>** verify that in //Choose a network authentication method:// field **Protected EAP (PEAP)** is selected,
+   * **3)** verify that in //Choose a network authentication method:// field **Protected EAP (PEAP)** is selected;
-   * **<color red> 4) </color>** then click on **Settings**.
+   * **4)** then click on **Settings**.
 {{:services:network:internal:portauth:windows:7:win7dot1x7.jpg|Put a check in IEEE 802.1X authentication then click on Settings...}}\\
 \\
-h) In //Protected EAP Properties// window,
+h) In //Protected EAP Properties// window:
-   * **<color red> 1) </color>** **remove** the check in **Validate server certificate** box,
+   * **1)** **remove the check** in //Validate server certificate// box;
-   * **<color green> 2) </color>** verify that in //Select Authentication Method// **Secured password (EAP-MSCHAP v2)** is selected,
+   * **2)** verify that in //Select Authentication Method//  **Secured password (EAP-MSCHAP v2)** is selected;
-   * **<color red> 3) </color>** click on **Configure...**.
+   * **3)** click on **Configure...**.
 {{:services:network:internal:portauth:windows:7:win7dot1x8.jpg|Remove the check in Validate server certificate box,  then click on Configure...}}\\
 \\
-i) In //EAP MSCHAPv2 Properties// window, //Authentication// tab,
+i) In //EAP MSCHAPv2 Properties// window:
-   * **<color red> 1) </color>** **remove** the check in **Automatically use my Windows logon name and password** box,
+   * **1)** **remove the check** in// Automatically use my Windows logon name and password// box;
-   * **<color red> 2) </color>** click **OK** on this window and in //Protected EAP Properties// window (step h) too.
+   * **2)** click **OK** on this window and in //Protected EAP Properties// window (step h) too.
 {{:services:network:internal:portauth:windows:7:win7dot1x9.jpg|Remove the check in Automatically use my Windows logon name and password box, then click on OK ... again OK in Protected EAP Properties window...}}\\
 \\
-j) In the //Local Area Connection Properties// window,
+j) In the //Local Area Connection Properties// window, //Authentication// tab:\\
-   * click on **Additional Settings...**
+click on **Additional Settings...**\\
 {{:services:network:internal:portauth:windows:7:win7dot1x10.jpg|Click on Additional Settings...}}\\
 \\
-k) On the //Advanced settings// window,
+k) On the //Advanced settings// window:
-   * **<color red> 1) </color>** put a check in **Specify authentication mode**,
+   * **1)** **put a check** in //Specify authentication mode// box;
-   * **<color red> 2) </color>** in //**User or computer authentication**// drop down list,
+   * **2)** in **User or computer authentication** drop down list;
-   * **<color red> 3) </color>** select **User authentication**,
+   * **3)** select **User authentication**;
-   * **<color red> 4) </color>** then click on **Save credentials**.
+   * **4)** then click on **Save credentials**.
 {{:services:network:internal:portauth:windows:7:win7dot1x11.jpg|Choose carefully the correct options on this window...}}\\
 \\
-l) In the //Windows Security// window,
+l) In the //Windows Security// window:
-   * **<color red> 1) </color>** insert your **Username**, **<color red> 2) </color>** and **Password** (the same of your SISSA webmail),
+   * **1)** insert your //**your SISSA username**//
-   * **<color red> 3) </color>** then click **OK** here and on **ALL** windows in order to save and confirm all settings.
+   * **2)** and insert your //**your SISSA password**//
+   * **3)** then click **OK** here and on **ALL** windows in order to save and confirm all settings.
 {{:services:network:internal:portauth:windows:7:win7dot1x12.jpg|Insert your SISSA (webmail) Username and Password, then click OK here and on ALL windows in order to save and confirm all settings.}}